Black & Gold Anodised Aluminium
Temperered Glass
Silver & Gold Anodised Aluminium
Temperered Glass
Finish
Weight: 4.6kg
Size and Weight
Dual 1.5-inch (diagonal) white monochrome OLED display
128x128-pixel resolution at 16-bit grayscale each
Display
Power button
Short press to power on / display off
Long press to standby
Menu button
Press to settings / return
Navitation Dial
Rotate to control volume or settings
Press to mute / confirm
Mode Selector
Select between modes:
-
Preamp
-
Preamp + Headphone Amp
-
Headphone Amp
Front and Rear
1 x Balanced XLR, max 16 Vrms, approx. 94 kΩ
Expandable with Harmony LExt
Analog Inputs
1 x XLR, approx. 200 Ω
1 x RCA, approx. 100 Ω
Preamp Outputs
15Hz – 80kHz, ± 3 dB (Preamp)
10Hz – 80kHz, ± 3 dB (Headphone amplifier)
Frequency
Response
0.005% (Preamp)
0.01% (Headphone amplifier)
THD+N
≤ -120dB (Preamp Balanced)
≤ -100dB (Preamp Single Ended)
≤ -100dB (Headphone Balanced)
≤ -65dB (Headphone Single Ended)
Crosstalk
≤ 3.8Vrms (Preamp Balanced)
≤ 1.8Vrms (Preamp Single Ended)
≤ 19.2Vrms@4V source - 61.0Vrms@12.5V source (Headphone Balanced)
≤ 8.5Vrms@4V source - 30.5Vrms@6.2V source (Headphone Single Ended)
Output Voltage
≥ 125dB (Preamp Balanced)
≥ 110dB (Preamp Single Ended)
≥ 110dB (Headphone Balanced)
≥ 100dB (Headphone Single Ended)
Signal to Noise
Ratio (SNR)
Microprocessor controlled 60 steps (±1dB/step) PMDR attenuator thru silent opto-coupler.
True balanced discrete class A buffered preamplifier.
True balanced headphone amplifier with proprietary discrete power amp using EXICON MOSFETs.
Mode selection between preamp, headphone amp, or both.
DC coupler with no LCR in the signal path.
Sophisticated protection system.
12V trigger input and output for system automation.
Expandable input with Harmony LExt.
Features
Remote control
Front panel
Controls
Weight: 157g
Remote Control
100 - 127 VAC / 220 - 240 VAC, 50 / 60Hz
Power
3.15A, Slow-blow, 5 x 20mm.
Fuse
Welcome card with Certificate of Authenticity
Harmony HP2A
Three spike shoes with alignment card
Remote control (Battery CR2032 not included)
Power cord
Cleaning cloth
In the Box
24-month limited warranty.
Warranty
Shop safe and smart with Laiv.
≤ 0.5 W in standby.
≤ 8.0 W for the preamplifier.
≤ 23.0 W for the headphone amplifier.
Power Consumption
1 x Balanced 4-pin XLR, approx. 0.07 Ω
1 x Balanced 4.4 mm jack, approx. 0.07 Ω
1 x Unbalanced 6.35 mm jack, approx. 0.035 Ω
Headphone Outputs
0 dB (Preamp output)
13.7 dB (Headphone balanced output)
7.7 dB (Headphone single ended output)
Gain
≤ 5µVrms (Preamp Balanced)
≤ 8µVrms (Preamp Single Ended)
≤ 400µVrms (Headphone Balanced)
≤ 200µVrms (Headphone Single Ended)
Noise
≤ 11.8W (Headphone Balanced)
≤ 2.8W (Headphone Single Ended)
Output Power
-
Colours vary by configuration and manufacturing process.
-
Size and weight vary by configuration and manufacturing process.
-
The specifications were evaluated using an Audio Precision APx Analyzer after the HP2A conditioned for 25 minutes. 1kHz, 4Vrms input to HP2A, output into 32 Ω at maximum output, A-weighted.
-
The power consumption was evaluated at 32 Ω, 700mVrms output.
-
We will try our best to provide the power cord with the plug that is suitable for you.
-
Check out our warranty policy for more details.